AgEagle drones the first to pass Virginia Tech’s test for safe flight over people

-
virginia tech testing

(From left to right) Engineer Jeremy Spink and injury biomechanics expert Barry Miller set up an impact test for a drone. | Source: Virginia Tech

Three of AgEagle’s eBee X series drones are the first to pass Virginia Tech’s set of test methods that demonstrate adherence to the Federal Aviation Administration’s (FAA) requirements for drone flights over people. 

This approval means anyone operating one of the approved AgEagles eBee X drones, the eBee X, eBee GEO and eBee TAC, in an applicable configuration can legally fly it over people. This process removes the need for users to seek permission for each individual operation through a waiver system. 

AgEagle’s eBee X fixed-wing drones are typically used for mapping, surveying and inspections. The lightweight, foam aircraft weigh less than 4.4 lbs. 

“We are confident that this will serve as a key driver in the growth of eBee utilization in the United States,” Barrett Mooney, AgEagle’s chairman and CEO, said. “It will further improve the business applications made possible by our drone platform for a wide range of commercial enterprises which stand to benefit from the adoption of drones in their businesses — particularly those in industries such as insurance for assessment of storm damage, telecommunications for network coverage mapping and energy for powerline and pipeline inspections, just to name a few.”

The testing methods are a collaboration between the Virginia Tech Mid-Atlantic Aviation Partnership (MAAP), an FAA-designated drone test site, and injury biomechanics experts in the university’s College of Engineering. 

In December 2021, the FAA signed off on Virginia Tech’s testing methods for drone flights over people. The new testing methods developed at Virginia Tech were created in response to a change in policy announced by the FAA the year before.

The change laid out a universal standard for flying drones over people, with limitations for flying over large groups. The standard is based entirely on the level of injury the drone could cause, with four risk-based categories the drones could fall into that are based on the amount of kinetic force it would transfer upon impact. 

These categories don’t take into account drones that are designed to crack or break on impact, which dissipates the kinetic energy of the drones and reduces the amount of energy transferred to whatever it hit. Virginia Tech’s testing methods are intended to fill that gap to allow more drones to receive widespread approval for flying above people. 

“This is a major, major change in how things are done,” Tombo Jones, the test site’s director, said. “The rule provided the first clear understanding of what’s required to safely operate over people. Our means of compliance provided the first pathway for utilizing the rule. This approval demonstrates that that pathway is viable.” 

Virginia Tech won a 2022 RBR50 Robotics Innovation Award from our sister publication for its testing methods. 

The post AgEagle drones the first to pass Virginia Tech’s test for safe flight over people appeared first on The Robot Report.



from The Robot Report - Robotics News, Analysis & Research https://ift.tt/N0aPhRM
via artificialconference

Comments

Post a Comment

Popular posts from this blog

Noah Medical’s Galaxy System is used in the US for the first time

-
Image
Noah Medical announced that its Galaxy System, an integrated system for navigated robotic bronchoscopy, was used for the first time in the United States at the University of Chicago Medicine by Dr. Kyle Hogarth.  This procedure marks the first commercial release of the Galaxy System in the US following its recent FDA clearance and first-in-human trials at Macquarie University Hospital in Sydney, Australia. The system was designed to give physicians more confidence in locating and navigating to lung nodules during biopsies as part of a more effective and efficient bronchoscopy procedure.   “The Galaxy System is the first robot for peripheral lung navigation that includes integrated imaging, which is the solution bronchoscopists have been asking for,” Hogarth said. “We are excited to be the first hospital in the United States to implement this next-generation robotic solution for our patients which we believe will improve and expedite the early diagnosis and treatment of lung cancer.
Read more

Chipotle testing avocado processing robot in test kitchen

-
Image
Chipotle Mexican Grill announced Autocado, an avocado processing cobotic prototype that cuts, cores, and peels avocados before they are hand mashed to create the restaurant’s famous guacamole. The prototype, developed in collaboration with Vebu , is currently being tested at the Chipotle Cultivate Center in Irvine , California.  How Autocado works  A team member loads Autocado with a full case of ripe avocados and selects the size setting. Autocado can hold up to 25 lbs. of avocados at once. One at a time, avocados are vertically oriented, then transferred to the processing device. The avocados are sliced in half. Their cores and skin are automatically removed, and the waste is discarded.  The fruit is safely collected in a stainless-steel bowl at the bottom of the device.  A team member removes the bowl of avocado fruit and moves it to the counter where they add additional ingredients and hand mash the avocados to make Chipotle’s signature guacamole.  How the Autocado idea s
Read more

Inside Comaus testing of Intrinsic Flowstate

-
Image
Intrinsic tested its latest platform and Flowstate with Comau , an Italian-based robot manufacturer and global systems integrator. Comau has been working with Intrinsic for several years now to validate Intrinsic’s platform technology and developer product, Flowstate, through real-world use cases.  Flowstate, announced earlier this year in May , is a robotic software development platform. It’s Intrinsic’s first developer product built on the Intrinsic platform. Comau was also introduced as the company’s first industry partner in May.  The Intrinsic Flowstate software  adds a layer of abstraction to traditional robotic software tools with the goal of reducing the development skillset required while making it easier than ever before to program a robot in simulation. “Partnering with Comau over the years has brought our team a tremendous amount of expertise, knowledge, and real-world use cases to focus our efforts on. We’re excited for what’s next and what it will mean to the solutio
Read more